Unirex EP2,Emotornations,14.1 oz ,Cartridge,Unirex EP2,Electric Motor,
Unirex Mobil EP2, 14.1 oz ,Cartridge, Grease , Unirex EP2, Lithium, High Rating,
|
Features |
Advantages and Potential Benefits |
|
Outstanding adhesion and water resistance |
Stays-in-place and resists wash-out in the presence of water, thereby extending lubrication intervals and helping equipment to last longer |
|
Excellent protection against rust and corrosion |
Keeps the lubricated surfaces protected, thereby reducing component wear and damage and helping to extend equipment life |
|
Potent extreme pressure/wear protection |
Designed to protect components under severe load and shock conditions, thereby reducing wear and increasing component life |
|
|
Designed to provide excellent service in severe high temperature applications, helps to extend lubricant and component life |
|
Excellent high temperature stability and service life |
Designed to provide excellent service in severe high temperature applications, helps to extend lubricant and component life |
Applications
• In applications where NLGI service classification GC/LB quality is required or preferred (EP 1 / EP 2)
• In chassis applications for on-road and off road equipment, where excellent adhesion and water resistance are required
• In a multitude of applications indoors and outdoors, in stationary and mobile equipment, in high and low temperature applications
• As a multi-purpose grease for use in a wide variety of applications, allowing for consolidation and simplification
Specifications and Approvals
|
This product has the following approvals: |
EP-2 |
|
Meritor O665 Permalube U-Joint Grease |
X |
Properties and Specifications
|
Property |
EP 0 |
EP 0 MOLY |
EP-1 |
EP 1 MOLY |
EP-2 |
LOTEMP EP |
LOTEMP MOLY |
|
Grade |
NLGI 0.5 |
NLGI 0.5 |
NLGI 1 |
NLGI 1 |
NLGI 2 |
NLGI 1.5 |
NLGI 1.5 |
|
Thickener Type |
Lithium Complex |
Lithium Complex |
Lithium Complex |
Lithium Complex |
Lithium Complex |
Lithium Complex |
Lithium Complex |
|
Base Oil Viscosity of Greases @ 40 C, mm2/s, AMS 1697 |
68 |
68 |
220 |
220 |
220 |
10 |
10 |
|
Corrosion Prevention, Rating, ASTM D1743 |
PASS |
PASS |
PASS |
PASS |
PASS |
PASS |
PASS |
|
Dropping Point, °C, ASTM D2265 |
190 |
190 |
280 |
280 |
300 |
260 |
260 |
|
Four-Ball Extreme Pressure Test, Weld Load, kgf, ASTM D2596 |
200 |
200 |
315 |
500 |
315 |
200 |
200 |
|
Four-Ball Wear Test, Scar Diameter, mm, ASTM D2266 |
|
|
|
|
0.5 |
|
|
|
Four-Ball Wear Test, Scar Diameter, 40 kg, 1200 rpm, 1 h, 75 C, mm, ASTM D2266 |
0.5 |
0.5 |
0.5 |
0,5 |
|
0.5 |
0.5 |
|
Penetration, 60X, 0.1 mm, ASTM D217 |
350 |
350 |
325 |
320 |
280 |
300 |
300 |
|
Timken OK Load, kg, ASTM D2509 |
27 |
27 |
27 |
27 |
27 |
27 |
27 |
Health and Safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @
