SSW070130T5SZ, Softstart, 100Hp, 600V, 3 Phases, IP20, 130 Amps, WEG,

SSW070130T5SZ, WEG 

• 100 Hp

• 230/460/600 Volts

• 3 Phases

• 130 Amps output

• Enclosure IP20

• Severe Duty Soft Starter

Soft Starters SSW07

Soft Starters are static starting devices, designed for the acceleration, deceleration and protection of the three phase, electric induction motor through the control of the voltage applied to the motor. The SSW07, with DSP control (Digital Signal Processor), was designed to provide great performance on motor starts and stops with an excellent cost-benefit relationship. Because it is easy to set up, it simplifies start-up activities and daily operation. The SSW07 is compact, optimizing space in electric panels. The SSW07 incorporates all electric motor protection classification and adapts to customer needs through its easy-to-install optional accessories. Such as, a keypad, a communication interface or a motor PTC input

Applications

• Chemical and PetrochemicalPlastic and Rubber
• Pulp and Paper g Sugar and Alcohol
• Beverages
• Cement and Mining
• Food and Ration 
• Textile g Metallurgy
• Ceramics 
• Glass
• Refrigeration
• Wood 
• Sanitation
• Conveyors

Standard Features

• Significant reduction in mechanical stresses of the coupling and transmission devices (gearboxes, pulleys, gears, conveyors, etc.) during start 
• Increases motor and equipment lifetime due to the elimination of mechanical shock
• Easy operation, setup, maintenance & installation 
• Operates in environments up to 55ºC (without derate for all models) 
• Integral, electronic motor protection
• Built-in electronic thermal relay
• Avoids the “Water Hammer” in pumps
• Limitation of voltage drop during start 
• Universal voltage (220 to 575 Vac)
• Switched type power supply with EMC filter for the control electronics (110 to 240 Vac)
• Thermal monitoring of both motor and soft starter

SSW07

Programming Features All programming necessary for starting any type of load is available through trimpots and dip-switch.

Voltage Ramp Permits smooth acceleration and/or deceleration, through voltage ramps. Current Limit Current limit during the start according to the application requiriments. Voltage Kick Start Enables an initial voltage boost which, provides initial starting torque.

This is necessary for starting high breakway torque loads. Built in By Pass Built-in by-pass minimizes power loss and heat dissipation in the thyristors, providing size reduction and contributing to energy saving. This is available in all models