| Specification |
Details |
| Model Number |
KBRG-225D |
| Part Number |
8800 |
| Drive Type |
Regenerative, Reversing SCR DC Drive |
| Input Voltage |
115/230 VAC, Single-Phase, 50/60 Hz |
| Output Voltage |
0–±90 VDC (with 115 VAC input), 0–±180 VDC (with 230 VAC input) |
| Output Current |
Up to 16 Amps DC |
| Horsepower Rating |
1.5 HP @ 115 VAC input, 3 HP @ 230 VAC input |
| Enclosure Type |
IP20 Chassis |
| Operating Temperature Range |
0 – 55 ºC (32 – 131 ºF) |
| Speed Regulation |
±1% of base speed (armature feedback), ±1% of set speed (tachometer feedback) |
| Speed Range |
50:1 |
| Acceleration Time |
Adjustable from 0.1 to 15 seconds (forward and reverse) |
| Deceleration Time |
Adjustable from 0.1 to 15 seconds (forward and reverse) |
| Current Limit |
Adjustable from 0 to 150% of range setting |
| Timed Current Limit (TCL) |
Adjustable from 1 to 15 seconds |
| Feedback Types |
Armature or Tachometer |
| Tachometer Input Voltage |
7 VDC, 20/30 VDC, or 50 VDC (jumper selectable) |
|
Protection Features
|
Armature fusing, AC line fusing, control circuit fusing, MOV transient protection, Auto Inhibit®, rapid response current limit, regenerative overspeed protection
|
|
| Diagnostic Indicators |
LEDs for Power On, Current Limit, Forward Enable, Reverse Enable |
| Control Modes |
Speed or Torque (jumper selectable) |
| Start/Stop Control |
Two-wire or three-wire start/stop circuit |
| Compliance |
UL Listed, CE Marked |
